Firestone 10.00-20 Truck/Bus Bias inner tube with TR444 valve
Firestone 10.00-20 Truck/Bus Bias inner tube with TR444 valve by Bridgestone Firestone at Shelby & Simon. MPN: 551767. Hurry! Limited time offer. Offer valid only while supplies last. SAFETY WARNING: DISREGARDING THESE MOUNTING INSTRUCTIONS MAY RESULT IN EXPLOSION CAUSING SERIOUS INJURY, OR DEATH. ONLY SPECIALLY TRAINED PERSONS USING PROPER EQUIPMENT SHOULD SERVICE TIRES AND TUBES. 1. Insert the tube in the tire, making sure any valve offset is in the same direction as the offset of the valve hole in the rim. Partially inflate to ROUND OUT tube. 2. Lubricate the base of the tube and the insides and bases of the tire beads with suitable mounting lubricant (Never use anti-freez
Product Description & Reviews
SAFETY WARNING: DISREGARDING THESE MOUNTING INSTRUCTIONS MAY RESULT IN EXPLOSION CAUSING SERIOUS INJURY, OR DEATH. ONLY SPECIALLY TRAINED PERSONS USING PROPER EQUIPMENT SHOULD SERVICE TIRES AND TUBES. 1. Insert the tube in the tire, making sure any valve offset is in the same direction as the offset of the valve hole in the rim. Partially inflate to ROUND OUT tube. 2. Lubricate the base of the tube and the insides and bases of the tire beads with suitable mounting lubricant (Never use anti-freeze, silicones or petroleum-based lubricants). When a flap is required, lubricate the rim side of the flap as well as the surface that will contact the tire. 3. Mount tire onto rim, completely install rings, and check for proper seating of components. 4. BEFORE FURTHER INFLATION, THE ENTIRE RIM/TIRE ASSEMBLY MUST BE PLACED IN A SAFETY CAGE, OR OTHER EQUIVALENT RESTRAINING DEVICE. ALWAYS STAND CLEAR OF ASSEMBLY WHILE INFLATING AND USE A REMOTE CONTROL INFLATION HOSE WITH AN IN-LINE GAGE AND CLIP-ON CHUCK. 5. NEVER EXCEED 40 PSI (35 PSI ON AGRICULTURAL TIRES) TO SEAT BEADS. IF THE BEADS DO NOT FULLY SEAT, DEFLATE THE ASSEMBLY, DEMOUNT THE TIRE, RELUBRICATE, AND REPEAT THE PROCESS. 6. After beads are fully seated, DEFLATE COMPLETELY to remove any buckles in the tube. Then reinflate to recommended operating pressure and thoroughly inspect for full and proper assembly BEFORE removing from the restraining device. 7. Tubes are only one component of a tire/rim assembly, and you should ALSO be familiar with the general mounting safety precautions recommended by the Rubber Manufacturers' Association (RMA), the rim manufacturer and the mounting equipment manufacturer. BE SURE TO UTILIZE THE PROCEDURES, TOOLS AND PRECAUTIONS REQUIRED BY THE OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA) AND RECOMMENDED BY THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION (NHTSA).
Features & Highlights
- STEM TYPE: TR444 valve stem for Light truck, truck-bus, mining sizes. Valve is supplied bent and should only be used in SLOTTED RIMS. Bent length is approx 5.1 inches with a maximum inflation is 150 psi. Not intended for use with liquid ballast.
- TRUSTED BRAND: Firestone inner tube for ATV Radial; made for Firestone
- SPECIAL FEATURES: the TR444 valve will come bent and should ONLY be used in slotted type wheels or rims
- VERSATILE SIZING: See description for full list of sizes that this tube can be used for
Have questions about this item (551767), or would like to inquire about a custom or bulk order?
If you have any questions about this product by Bridgestone Firestone, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
Premium Service inner tubes are manufactured to the highest quality. This tube is for industrial, forklift, and utility tire applications.Industrial inner tube for bias forklift and industrial tires. Fits sizes: 7.00-12. Quality made inner tube. Has ...
mpn: TU 0433, ean: 0671878052158,
This is a new radial Air-Loc 14R17.5 Industrial and light truck tire inner tube. It is approved for radial and bias tire use. It is a multi-fit tube that is made to be used in the following sizes:31x13.00-16.5, 33x15.50-16.5, 295/55R16.5, 330/55R16.5...
mpn: B94027071, ean: 8903094027071,
Built with a 6 ply rating and reinforced casing makes this one of the most puncture resistant atv tires on the market today. Aggressive large shoulder knobs wrap down the sidewall to provide excellent side bite to pull you out of the ruts without cre...
mpn: 278515, ean: 0671878058853,
Heavy Duty Skid Steer Loader Compact Tractor Tire Inner Tube. TR218 Metal Valve. Quick and Free Shipping. Radial and Bias Tire applications. May also be used in 7.00-15 7.50-15.